Orders delivered to Canada may be subject to import duties, taxes (GST/HST), brokerage fees, and customs clearance charges determined by Canadian customs authorities. These fees are not included in your purchase price and must be paid by the recipient upon delivery. Customs processing times may vary and are outside of our control.
Please note:
• All import-related costs are the responsibility of the buyer
• Refused shipments due to unpaid duties will not be refunded for shipping costs
• Claims related to customs handling fall under the carrier’s responsibilityBy placing your order, you agree to these terms.
Waterborne performance finish
Product essentials
1 component water-based PU acrylate for parquet and wooden surfaces. Gives a clear protection to the wood. Easy to use, universal and neutral in overlaps.
Delivery rates and eligibility are shown at checkout for your destination.
1 component water-based PU acrylate for parquet and wooden surfaces. Gives a clear protection to the wood. Easy to use, universal and neutral in overlaps.
» Good processing properties.
» Easy to apply
» Good chemical and mechanical resistance.
TEST BEFORE YOU COMMIT
Wood species, sanding, and light change every result. Test the color and sheen on your exact board before committing to the full project.
COMPLETE THE SYSTEM
Preparation, primer, finish and compatible care work together to control appearance and performance.
EASY FLOW
Professional wood finishing
The final result depends on the wood, preparation, application, and compatible finishing system. Remove uncertainty before the full project.
Species, tannin content, grain, and sanding can materially change color and absorption.
Confirm coverage, number of coats, hardener ratio, tools, and site conditions before ordering.
Use the current preparation, application, drying, and maintenance instructions for the selected product.
AFTERCARE FOR WATERBORNE FINISHES
Film-forming finishes need compatible care that cleans without dulling the surface or building an uncontrolled sheen. Match periodic maintenance to the selected finish.
Choose the sheen to update periodic care.
Routine care
Frequent cleaning
Removes everyday residue without leaving a film or changing the selected sheen.
Periodic renewal
When the matte finish looks tired
Restores and protects matte or invisible surfaces without introducing unwanted gloss.
Periodic renewal
When satin protection needs renewal
Refreshes the protective film while preserving the controlled satin appearance.
Deep reset
Before periodic renewal
Deep-cleans heavily soiled floors and removes old polish layers before recoating.
Product field guide
Open each relevant step for product-specific preparation, application, finishing and long-term care. Only applicable stages are shown.
1C WATERBORNE PERFORMANCE
A universal one-component system with forgiving application, controlled sheen and dependable chemical and mechanical resistance.
THE 1C BUILD
Clear protection in three coatsRemove prior coatings and sand clean, dry wood to P120-150.
Apply 80-100 g/m2 per coat by brush or roller. Allow approximately 4-6 hours between coats.
Sand with P180-220, remove dust and apply the third coat evenly.
Technical data
Easy FlowGUIDED SELECTION
Two decisions are enough to reach the right product family. Start with the surface, then choose the result.
Always test the complete system on your wood before the full application.
