Professional wood color system
Color + application gallery
Red oak before and after Pink Blocker 2C, shifting from pink undertones to a pale neutral tone

Professional wood color system

Pink Blocker for Red Oak

$152.33

Neutralizes pink and red undertones in wood before finishing. Mix the two components, test on your wood, then complete the system with a protective finish.

Explore the before & after and how it works →
Size
Size: 2L (0.53 gal)
¡Disponible! Listo para enviar
Free shipping included $99 threshold

Free shipping on orders $99+ · Contiguous U.S. only

Fast dispatch
Expert support
Secure checkout
Product essentials & how to use

Tinte reactivo con base de agua que neutraliza el aspecto de color rosa de la madera. También para las clases de madera que no contienen taninos.

—

» Neutraliza el aspecto de color rosa.

» A usar principalmente en roble rojo.

» Puede combinarse con todos los productos de la gama Ciranova®.

PREPARACIÓN

Asegúrese de eliminar completamente cualquier capa de acabado vieja y de que el suelo esté libre de polvo y otra suciedad. Puede usarse en madera lijada y cepillada. Prehumedecer la madera reduce el riesgo de solapamiento.

APLICACIÓN

Mezclar el PINK BLOCKER CLEAR con el PINK BLOCKER STAIN 1/1. Aplicar el producto de manera uniforme con un rociador a presión, rodillo o brocha, y luego distribuir de manera uniforme con una brocha o fregona.

Iguale la superficie con un disco con cepillo pasado el tiempo de reacción. A continuación, deberá eliminarse todo rastro de polvo de la superficie, tras lo cual puede dar un acabado a Reactive Stain con un aceite o barniz de la gama Ciranova®. Para información acerca del uso de barnices, contacte con el servicio técnico de Ciranova®.

SUGERENCIAS

TEST BEFORE YOU COMMIT

See the finish on your wood.

Wood species, sanding, and light change every result. Test the color and sheen on your exact board before committing to the full project.

Explore samples Ask a finish specialist
  • 01Your wood
  • 02Your lighting
  • 03Expert guidance

COMPLETE THE SYSTEM

From test board to protected finish.

Build color deliberately, then select the protection and maintenance system that preserves it.

01TestConfirm on your woodSamples 02ColorPINK BLOCKER 2C - NUEVOSelected product 03ProtectChoose oil or varnishProtection systems 04MaintainPreserve the resultCare products

Technical data

Tone control, specified.

A practical specification reference for preparing, mixing and applying Pink Blocker 2C.

Pink Blocker 2C technical specifications
Technical parameterSpecification
Product typeTwo-component, water-based reactive pretreatment
Recommended useInterior wood floors and panels with pink or red undertones, especially red oak
Mixing ratio1:1 — equal parts Pink Blocker Clear and Pink Blocker Stain
Coverage per liter · per coatApproximately 160–220 sq. ft. per liter
Pot lifeApproximately 12 hours after mixing
ApplicationSpray, roller or brush; distribute evenly with a brush, T-bar or mop.
Reaction timeApproximately 12 hours; allow the full reaction before finishing.
After reactionLightly smooth the raised grain and remove dust before the next step.
Protective finishRequired. Complete with a compatible Ciranova oil or waterborne finishing system; confirm waterborne compatibility with technical support.

Coverage is approximate and varies with wood and application. Always test the complete system on your actual wood and follow the product technical data sheet.

Product details

Product field guide

Open each relevant step for product-specific preparation, application, finishing and long-term care. Only applicable stages are shown.

Preparation

Make sure that all old finish coats are completely removed and that the floor is free from dust and other dirt. Can be used on sanded, planed and brushed wood. Pre-wetting the wood can reduce the risk of overlapping.

Application

Mix the PINK BLOCKER CLEAR with the PINK BLOCKER STAIN in a ratio of 1/1. Apply the product evenly with sprayer, roller or brush and then even out with a brush, T-bar or mop.

Pink Blocker can “pop” the grain so it is suggested that you smoothen the surface after the full reaction time with a buffing pad. Afterwards, the surface should be made dust free, prior to finishing with an oil or waterborne finish from the Ciranova® range. Please contact Ciranova® Technical Support for information about using a waterborne finish.

Continue the system

A stain can be applied afterward, and a finish on top.

This product is not a finish, it needs to be protected, with a Ciranova finish product.

Maintain

Maintain the completed surface with products and intervals appropriate to the final protective finish. Follow the maintenance guidance for the system used.

Find your recommended Ciranova system

Select your wood species and desired look to get the suggested color step and compatible protection systems.

▲ Recommended • Possible ▼ Not recommended N/A Not applicable
Always test first. Refer to the product TDS for full instructions and limitations.
Start by selecting a wood species and a desired look.

Free U.S. shipping $99+