Natural oil protection
Two-component one-coat oil
Color and protection in a single application for interior floors, furniture and paneling.
Test the selected color on the actual wood before committing. The 100 ml size is intended for color validation; full-size UN1CO uses the included hardener.
Free shipping on orders $99+ · Contiguous U.S. only
TEST BEFORE YOU COMMIT
Wood species, sanding, and light change every result. Test the color and sheen on your exact board before committing to the full project.
COMPLETE THE SYSTEM
Prepare the wood, apply the selected oil, and keep the surface performing with compatible care.
CIRANOVA UNICO
Professional wood finishing
The final result depends on the wood, preparation, application, and compatible finishing system. Remove uncertainty before the full project.
Species, tannin content, grain, and sanding can materially change color and absorption.
Confirm coverage, number of coats, hardener ratio, tools, and site conditions before ordering.
Use the current preparation, application, drying, and maintenance instructions for the selected product.
AFTERCARE FOR OILED WOOD
Oiled wood should be cleaned without stripping away the oils that create its color, feel and protection. Use the same care logic from routine cleaning through periodic renewal.
Routine care
Regular cleaning
Cleans and nourishes while supporting the floor's water-resistant protection.
Periodic renewal
As the surface looks dry
Refreshes worn areas and renews protection without a full sanding cycle.
Deep reset
Before periodic renewal
Removes heavy dirt and old care residue before applying fresh maintenance oil.
Finish in One Working Day
Advanced 2-component oil (oil + hardener) delivers color + protection in one coat—reducing labor, downtime, and return visits.
Healthier Interiors by Design. Zero VOC
Made from renewable natural materials and engineered for professional environments without harmful emissions.
Architectural Color Control
16 shades to match tone, mood, and design intent.
Technical data · UN1CO
UN1CO specifications for planning coverage and application.
| Technical parameter | Specification |
|---|---|
| Product type | Two-component oil for interior wood |
| Recommended use | Wood floors and furniture |
| Coverage per liter · per coat | Approximately 550–650 sq. ft. per liter |
| Coats | 1 coat |
| Mixing ratio | 100 parts oil : 30 parts UN1CO hardener |
| Rest after mixing | Approximately 10 minutes before application |
| Pot life | Approximately 3 hours from adding the hardener |
| Application | Buffing machine or brush |
| Excess removal | Within 15 minutes of application; buff or wipe until dry to the touch |
| Light foot traffic | After approximately 24 hours |
Coverage is approximate for one coat and varies with wood and application. Drying depends on temperature, humidity, ventilation and the amount applied. Follow the current technical data sheet for the complete application and curing instructions.
Product field guide
Open each relevant step for product-specific preparation, application, finishing and long-term care. Only applicable stages are shown.
Aceite de 2 componentes y 1 capa de última generación que utiliza materiales naturales renovables. Gracias a su tecnología especial, solo requiere la aplicación de una capa. La combinación de aceite y endurecedor ofrece un secado rápido y una excelente resistencia a productos químicos.
—
» Protege y da color en una sola capa
» Secado rápido
» Libre de COV
Asegúrese de eliminar completamente cualquier capa de acabado vieja y de que el suelo esté libre de polvo y otra suciedad. Puede usarse en madera lijada y cepillada. Para un coloreado más intenso, la madera puede humedecerse previamente.
Remover y agitar bien antes de usar. Mezcle el aceite con el endurecedor (100/30) y deje reposar el producto durante unos 10 minutos. Aplique UN1CO uniformemente con una pulidora de suelos o brocha. Deje que UN1CO se asiente y elimine el aceite sobrante antes de 15 minutos con un disco o paño hasta que la superficie esté seca al tacto. Haga una prueba de UN1CO antes de usarlo con maderas exóticas. Para aplicaciones industriales (rodillo, espray), consulte con el servicio técnico de Ciranova®.
Para una protección optima y mantenimiento mínimo, puede dar un acabado a UN1CO con FORTICO 2C. Consulte la hoja de datos técnicos correspondiente.
Para el mantenimiento regular, recomendamos Parquet Soap de Ciranova®. Para el mantenimiento periódico, use Maintenance Oil de Ciranova® o, en caso de suciedad excesiva, use primero Intensive Cleaner de Ciranova®. UN1CO se endurece totalmente al cabo de +/- 7 días. No utilice ningún producto de mantenimiento o agua sobre el suelo durante ese periodo.
This product is the protective finish in the system. Apply it according to the current Technical Data Sheet; do not add an extra coating unless the specified system calls for one.
Free U.S. shipping $99+
GUIDED SELECTION
Two decisions are enough to reach the right product family. Start with the surface, then choose the result.
Always test the complete system on your wood before the full application.
