Routine care
Regular cleaning
JABÓN PARA PARQUÉS
Cleans and nourishes while supporting the floor's water-resistant protection.
Natural oil protection
Aceite de parqué modificado con una resistencia excelente al desgaste. Buenas propiedades de rellenado, color natural y excelente resistencia química y mecánica. Acabado muy mate que no produce reflejos con el tiempo. La resistencia puede mejorarse añadiendo un endurecedor de UA.
—
» Acabado mate y natural que mantiene el aspecto natural de superficies de madera.
» Secado rápido.
» Resistencia excelente a productos químicos.
Asegúrese de eliminar completamente cualquier capa de acabado vieja y de que el suelo esté libre de polvo y otra suciedad. Puede usarse en madera lijada y cepillada. Para un coloreado más intenso, la madera puede humedecerse previamente.
Remover y agitar bien antes de usar. Aplique Hardwaxoil MAGIC uniformemente con una pulidora de suelos o brocha. Deje que Hardwaxoil MAGIC se asiente y elimine el aceite sobrante lo antes posible (antes de que pasen unos minutos) con un disco o paño hasta que la superficie esté seca al tacto. Maderas más duras, como el roble, requieren 2 capas. En maderas más blandas pueden aplicarse varias capas. Haga una prueba de Hardwaxoil MAGIC antes de usarlo con maderas exóticas. Para aplicaciones industriales (rodillo, espray), consulte con el servicio técnico de Ciranova®.
CONSEJO: para prolongar el tiempo de utilización abierto del aceite, puede añadir retardante de aceite Ciranova®.
Los aceites con color necesitan una capa de acabado con Hardwaxoil Magic (satinado) o Hardwaxoil TITAN (aplicación con rodillo).
Para el mantenimiento regular, recomendamos Parquet Soap de Ciranova®. Para el mantenimiento periódico, use Maintenance Oil de Ciranova® o, en caso de suciedad excesiva, use primero Intensive Cleaner de Ciranova®. Hardwaxoil MAGIC se seca totalmente al cabo de +/- 7 días. No utilice ningún producto de mantenimiento o agua sobre el suelo durante ese periodo.

Free shipping on orders $99+ · Contiguous U.S. only
TEST BEFORE YOU COMMIT
Wood species, sanding, and light change every result. Test the color and sheen on your exact board before committing to the full project.
COMPLETE THE SYSTEM
Prepare the wood, apply the selected oil, and keep the surface performing with compatible care.

HARDWAXOIL MAGIC
Professional wood finishing
The final result depends on the wood, preparation, application, and compatible finishing system. Remove uncertainty before the full project.
Species, tannin content, grain, and sanding can materially change color and absorption.
Confirm coverage, number of coats, hardener ratio, tools, and site conditions before ordering.
Use the current preparation, application, drying, and maintenance instructions for the selected product.
AFTERCARE FOR OILED WOOD
Oiled wood should be cleaned without stripping away the oils that create its color, feel and protection. Use the same care logic from routine cleaning through periodic renewal.
Routine care
Regular cleaning
Cleans and nourishes while supporting the floor's water-resistant protection.
Periodic renewal
As the surface looks dry
Refreshes worn areas and renews protection without a full sanding cycle.
Deep reset
Before periodic renewal
Removes heavy dirt and old care residue before applying fresh maintenance oil.
Hardwaxoil Magic · Color portfolio
Color shifts with species, sanding, application rate, and light. Explore the complete portfolio, then test the selected finish on the actual project wood.
Technical data · Hardwaxoil Magic
Hardwaxoil Magic specifications for planning coverage and application.
| Technical parameter | Specification |
|---|---|
| Product type | Solvent-based hardwax oil |
| Recommended use | Interior wood floors and furniture |
| Coverage per liter · per coat | Approximately 450–550 sq. ft. per liter |
| Coats | 2 coats on hardwoods; additional coats may be needed on softwoods |
| Finish | Ultra matte |
| Application | Buffing machine or brush; remove excess within a few minutes until dry to the touch |
| Optional hardener | Hardener UA, 5% — 100 parts oil : 5 parts hardener |
| Pot life with hardener | Approximately 3 hours from adding Hardener UA |
| Recoat time | Approximately 6 hours |
| Light foot traffic | After approximately 24 hours |
Coverage is approximate for one coat and varies with wood and application. Drying depends on temperature, humidity, ventilation and the amount applied. Follow the current technical data sheet for the complete application and curing instructions.
Product field guide
Open each relevant step for product-specific preparation, application, finishing and long-term care. Only applicable stages are shown.
This product is the protective finish in the system. Apply it according to the current Technical Data Sheet; do not add an extra coating unless the specified system calls for one.
Free U.S. shipping $99+
GUIDED SELECTION
Two decisions are enough to reach the right product family. Start with the surface, then choose the result.
Always test the complete system on your wood before the full application.