Compatible care for oiled wood
INTENSIVE CLEANER
Product essentials & how to use
Thoroughly cleans oiled wood. Specifically for removing stains and soap residue. It is recommended to use the intensive cleaner before applying the maintenance oil.
» Provides deep cleaning of oiled wood.
» Removes dirt and soap residue.
APPLICATION
Dilute the Ciranova® Intensive Cleaner in 1/20 lukewarm water. Clean the wood with a mop, microfiber cloth or soft scrubbing brush in the direction of the wood grain. You can also use a buffing machine with a green pad. If the wood is very dirty, the solution can be used in a higher concentration. Afterwards, the wood should be properly rinsed with clean water
After using the intensive cleaner, the wood must always be treated with Ciranova® Maintenance Oil.
MAINTENANCE
It is recommended to follow the Ciranova® maintenance program to keep the floor in optimal condition.
Free shipping on orders $99+ · Contiguous U.S. only
COMPLETE THE SYSTEM
Care that respects an oil finish.
Identify the original oil, clean at the right intensity and renew only when the surface condition requires it.
INTENSIVE CLEANER
Ciranova / Maintenance
Care is a system, not a single bottle.
Match every maintenance product to the original finish and the floor condition. Clean, restore, and protect in the correct order.
-
01
Know the original finish
Oiled, varnished, and factory-finished surfaces require different maintenance chemistry.
-
02
Clean before care
Remove the correct level of soil or residue before applying a refresher or protective treatment.
-
03
Maintain by condition
Use traffic, appearance, and wear to set the cadence rather than waiting for visible damage.
Technical data · Intensive Cleaner
Performance, specified.
A concise specification reference for selecting and using Intensive Cleaner.
| Technical parameter | Specification |
|---|---|
| Product type | Waterborne deep cleaner |
| Recommended use | Oiled wood; removes dirt, stains and soap residue |
| Dilution | 1:20 in lukewarm water |
| Application | Mop, microfiber cloth or soft brush along the grain |
| Final rinse | Rinse thoroughly with clean water |
| Drying time | Approximately 2–4 hours |
| Required aftercare | Treat the clean, dry wood with Ciranova Maintenance Oil |
| Storage / transport | 5–25°C (41–77°F) |
Corrosive product. Follow the product label and safety data sheet when handling and diluting.
Product details
Product field guide
Open each relevant step for product-specific preparation, application, finishing and long-term care. Only applicable stages are shown.
Free U.S. shipping $99+