Professional wood color system
Product essentials
Reactive water-based aging stain to easily and quickly give the wood a weathered look. Can also be used on wood that does not contain tannin.
Free shipping on orders $99+ · Contiguous U.S. only
AQUAVINTAGE 2C
Professional wood finishing
The final result depends on the wood, preparation, application, and compatible finishing system. Remove uncertainty before the full project.
Species, tannin content, grain, and sanding can materially change color and absorption.
Confirm coverage, number of coats, hardener ratio, tools, and site conditions before ordering.
Use the current preparation, application, drying, and maintenance instructions for the selected product.
Technical data · Aquavintage 2C
Aquavintage 2C specifications for planning coverage and timing. Mixing, application and protection are covered step by step in the guide below.
| Technical parameter | Specification |
|---|---|
| Product type | Two-component, water-based reactive aging stain |
| Recommended use | Interior wood floors and panels, including wood without tannin |
| Coverage per mixed liter · per coat | Approximately 160–220 sq. ft. per liter of A+B mixture |
| Reaction time | Approximately 12 hours; allow the full reaction before finishing |
| Pot life | Approximately 4 weeks after mixing |
Coverage is approximate for one coat and varies with wood and application. Test the complete system on your actual wood. Drying and reaction times depend on site conditions.
Two-part color system
Aquavintage 2C pairs a color component with its activator to create a weathered, grain-led result on a broad range of wood species.
Why Aquavintage 2C
Reactive water-based aging stain to easily and quickly give the wood a weathered look. Can also be used on wood that does not contain tannin.
» Positive stain that accentuates the wood grain.
» Provides depth and a unique texture to the wood.
» Also usable on wood types that do not contain tannin.
Remove previous finish coats and all dust or contamination. Use on sanded, planed or brushed wood. Pre-wetting can help reduce overlap marks.
Mix Color A with Activator B at a 1:1 ratio and stir thoroughly. Apply evenly by spray, roller or brush, then level with a brush or mop.
After the full reaction time, buff the surface and remove all dust. Protect the result with a compatible Ciranova oil, or request guidance before specifying a waterborne finish.
AQUAVINTAGE 2C · Color portfolio
Color shifts with species, sanding, application rate, and light. Explore the complete portfolio, then test the selected finish on the actual project wood.
GUIDED SELECTION
Two decisions are enough to reach the right product family. Start with the surface, then choose the result.
Always test the complete system on your wood before the full application.
