CIRANOVA PINK BLOCKER 2C

Turn Red Oak into White Oak!

BEFORE

AFTER

Find your recommended Ciranova system

Select your wood species and desired look to get the suggested color step and compatible protection systems.

 Recommended  Possible  Not recommended N/A Not applicable
Always test first. Refer to the product TDS for full instructions and limitations.
Start by selecting a wood species and a desired look.

Product details

Preparation

Make sure that all old finish coats are completely removed and that the floor is free from dust and other dirt. Can be used on sanded, planned and brushed wood. Pre-wetting the wood can reduce the risk of overlapping.

Application

Mix the PINK BLOCKER CLEAR with the PINK BLOCKER STAIN in a ratio of 1/1. Apply the product evenly with sprayer, roller or brush and then even out with a brush, T-bar or mop.

Pink Blocker can “pop” the grain so it is suggested that you smoothen the surface after the full reaction time with a buffing pad. Afterwards, the surface should be made dust free, prior to finishing with an oil or waterborne finish from the Ciranova® range. Please contact Ciranova® Technical Support for information about using a waterborne finish.

Afterwards

A stain can be applied afterward, and a finish on top.

This product is not a finish, it needs to be protected, with a Ciranova finish product.

Free shipping