ECOFIX PLUS
- Price
- $ 475.88
ECOFIX PLUS is an invisible, 35% Bio-based, environmentally friendly, water-based PU impregnating oil for parquet and wooden furniture. The wood will have an untreated and ultra matte appearance. ECOFIX PLUS is non yellowing and has anti-slip properties. The mechanical & chemical resistance can be further improved by adding a hardener.
» Ultimate invisible finish
» Gives an untreated appearance
» Very easy to apply
» Non-Yellowing
Preparation
Make sure all prior coatings are completely removed and the wood surface is free from dust and other contamination. Can be used on sanded, planed and brushed wood.
Application
ECOFIX PLUS can be used both as a primer and as a finishing coat. It can be applied in three coats. Stir thoroughly before use and do not dilute. Apply the product using a roller or brush. A short-pile roller is recommended (microfiber 4-6mm). Contact Ciranova technical support for spray application. Apply the first coat in the direction of the wood. After 4-6 hours, apply a second coat in the same way as the first coat. Let dry for 12-24 hours and afterwards do an intermediate sanding using grit 180-220, then apply the third coat.
DRYING TIMES
Touch dry: after 20 to 30 minutes.
Sandable : after 4 to 6 hours.
Lightly walkable: after 24 hours
The drying times are highly dependent on the applied quantity, temperature, humidity and ventilation.
TECHNICAL DATA
Case | 4 x 5 L 6 x 1 L |
---|---|
Cleaning | water |
Coverage | 125-150 sq.ft./L per coat |
Disposal | Dispose of residue and empty packaging in accordance with local ordinances |
Drying times | Dust dry: after 20 to 30 minutes Sandable: after 4 to 6 hours Lightly walkable: after 24 hours Fully cured: after +/- 7 days |
Gloss level | Invisible |
Product type | waterborne |
Sanding grit | P 120-150 |
Shelf life | 12 months in the original and unopened packaging |
Solids content | +/- 31% |
Storage/transport | between 5°C and 25°C |
Viscosity | +/-25 sec - DIN 4mm |
Coverage Calculator
Important notice: The calculated consumption can vary due to various factors, e.g. cut, structure and age of the wood, etc. Please also consult the product label for the most current information.
Disclaimer: For the most accurate and up-to-date application instructions, please refer to the product label on the can. Information provided online is intended as a general guide.