Natural oil protection
WORKTOP OIL
Product essentials & how to use
Ciranova WORKTOP OIL is the perfect finish for wooden worktops, cutting boards, furniture, and tables on which food is prepared. The WORKTOP OIL provides natural, water-repellent protection.
Ciranova WORKTOP OIL has been tested in line with the 1935/2004 standard and, after drying, meets the requirements to be used on wood that comes into contact with food. Ciranova WORKTOP OIL is made from natural waxes, modified oils, and vegetable and renewable fatty acids.
» Very suitable for wooden worktops, cutting boards, and tables
» Provides a water and stain-resistant finish
» Tested according to the NO 1935/2004 article 3C standard
» Easy to apply
PREPARATION
Ensure that all old finishing layers have been completely removed and that the surface is free of dust and other contaminants.
APPLICATION
Shake the WORKTOP OIL well before use. You can easily apply the Ciranova WORKTOP OIL with a lint-free cloth in the direction of the wood grain. For larger surfaces, you can use a brush.
Apply a thin layer and let the oil soak into the wood for 15 minutes, then wipe the surface dry with a lint-free cloth. For hard woods such as oak, at least 2 coats are required. Multiple coats can be used for soft woods.
DRYING TIMES: Can be painted over after +/- 6 hours. Drying times depend on the amount applied, ambient temperature, humidity, and ventilation.
Use Ciranova WORKTOP OIL as both a base and final coat.
MAINTENANCE
Apply a new coat of WORKTOP OIL Ciranova regularly to ensure permanent water-repellent protection. In the event of heavy soiling, use the Ciranova intensive cleaner to clean the wood first. WORKTOP OIL is only fully cured after +/- 7 days. Do not treat with water or maintenance products.
Delivery rates and eligibility are shown at checkout for your destination.
TEST BEFORE YOU COMMIT
See the finish on your wood.
Wood species, sanding, and light change every result. Test the color and sheen on your exact board before committing to the full project.
- 01Your wood
- 02Your lighting
- 03Expert guidance
COMPLETE THE SYSTEM
Everything your oil finish needs.
Prepare the wood, apply the selected oil, and keep the surface performing with compatible care.
WORKTOP OIL
Professional wood finishing
Specify the whole system.
The final result depends on the wood, preparation, application, and compatible finishing system. Remove uncertainty before the full project.
-
01
Test the actual wood
Species, tannin content, grain, and sanding can materially change color and absorption.
-
02
Calculate the system
Confirm coverage, number of coats, hardener ratio, tools, and site conditions before ordering.
-
03
Follow technical data
Use the current preparation, application, drying, and maintenance instructions for the selected product.
Technical data · Worktop Oil
Performance, specified.
Worktop Oil specifications for planning coverage and application.
| Technical parameter | Specification |
|---|---|
| Product type | Solvent-based oil with natural waxes |
| Recommended use | Wooden worktops, cutting boards and tables |
| Coverage per liter · per coat | Approximately 320–375 sq. ft. per liter |
| Coats | At least 2 coats on hardwoods; additional coats may be needed on softwoods |
| Application | Lint-free cloth along the grain; brush for larger surfaces |
| Excess removal | Allow 15 minutes to penetrate, then wipe dry |
| Recoat time | Approximately 6 hours |
| Full cure | Approximately 7 days; avoid water and maintenance products during this period |
| Finishing system | Use Worktop Oil for both the base and final coats |
Coverage is approximate for one coat and varies with wood and application. Drying depends on temperature, humidity, ventilation and the amount applied. Follow the current technical data sheet for the complete application and curing instructions.
Product details
Product field guide
Open each relevant step for product-specific preparation, application, finishing and long-term care. Only applicable stages are shown.
Protection integrated
This product is the protective finish in the system. Apply it according to the current Technical Data Sheet; do not add an extra coating unless the specified system calls for one.
Free U.S. shipping $99+