PINK BLOCKER 2C

Water-based reactive stain which neutralizes the pink appearance of wood. Also suitable for wood types which do not contain tannin.

» Neutralizes the pink appearance of certain wood species.

» Above all for use on red oak.

» Can be finished afterwards with any product from the Ciranova® line.

PREPARATION

Make sure that all old finish coats are completely removed and that the floor is free from dust and other dirt. Can be used on sanded, planned and brushed wood. Pre-wetting the wood can reduce the risk of overlapping.

APPLICATION

Mix the PINK BLOCKER CLEAR with the PINK BLOCKER STAIN in a ratio of 1/1. Apply the product evenly with sprayer, roller or brush and then even out with a brush, T-bar or mop.

Pink Blocker can “pop” the grain so it is suggested that you smoothen the surface after the full reaction time with a buffing pad. Afterwards, the surface should be made dust free, prior to finishing with an oil or waterborne finish from the Ciranova® range. Please contact Ciranova® Technical Support for information about using a waterborne finish.